Used XTOOL A80 Pro (H6 Pro) with VCI box to reset service light on Volkswagen Jetta car, worked like a charm!
Main steps:
The device used is XTOOL H6 Pro. But the guide also applied to A80 Pro.
Connect XTOOL VCI to the vehicle via the main cable, and connect to the XTOOL tablet via Bluetooth
Go to the “Diagnosis” function
Select Service/Maintenance-> EUROPE-> VW/AUDI/SEAT/SKODA-> Autoreset-> Autoset
There are two options that can be selected: Small service and Big service
Here select a small service to reset
Then you also can see two maintenance modes: Normal maintenance and Special maintenance.
Here select Normal maintenance to do
There are four options that can be performed as follows:
- 5000Km/180Day
- 7500Km/180Day
- 15000Km/365Day
- Manually set
Just choose the one you desire to do, here we select 7500Km/180Day to try
Setup is successful.
Note: If the dashboard display still prompts maintenance (service), please set small maintenance.
XTOOL A80 Pro (same as H6 Pro) full system diagnostic tool is available at xtool.co.uk:
https://www.xtool.co.uk/wholesale/xtool-a80-pro-full-system-with-ecu-coding.html
