Purpose: Register Battery replacement
Car model: 2015 BMW X3 F25
Device: Xtool PS90 Car Diagnosis System with 12 Special FunctionsTool
Operation video:
Note: this video applies to all BMW car models supported by XTOOL PS90.
Main steps:
Step 1: Connect Xtool PS90 tablet with the BMW car
Step 2: Select “BMW”-> “Automatic selection”
Confirm the vehicle profile detected incl. model series, model, version, model year, vehicle ident. number and basic type, etc.
Step 3: Select “Service”->”Body”-> “Power supply (battery)”-> “Battery”-> “Register battery replacement”
1.Make original BMW battery replacement
Then there will be three options to select
Press [1] to display kilometer reading of last battery change and last but one
Press [2] to register battery replacement
Press [3] to end service function
Here press [2] to next step
Now the battery replacement is entered in the DME/DDE in the next test step. There are also three options to select.
In this step press [F1] to enter battery replacement: same capacity
Press [Yes] to confirm the newly installed battery is original
Pay attention to the instruction of Evaluate state of battery charge and press [OK]
Confirm if there is a data matrix code on the label of newly installed battery, and press [OK] to continue
Enter second line of data matrix code as described and press [OK] to register battery replacement
Register battery replacement successfully and it will show the related data
Service function is done!
2.Make non-original battery replacement
The first several steps are same as original battery replacement, the difference is to confirm whether the newly battery is original, you should press [No] to register battery replacement (no need to enter matrix code)
Finally, the battery replacement was registered successfully.
Job’s done!
If you want to know more specific BMW car models covered by XTOOL PS90 diagnostic tool in BMS reset, please feel free to contact us.