SUZUKI Maruti Key Programming Done by XTOOL A80 Pro (H6 Pro)

Xtool Key Programmer

Is it possible to add a new key to SUZUKI Maruti (India) using XTOOL A80 Pro or H6 Pro?

The answer is YES. A80 Pro is same as H6 Pro. They have the same function, and the main difference is the hardware configuration.

 

It’s easy to do key programming, just refer to the guide as below.

Connect A80 Pro/ H6 Pro to the vehicle via the main cable

Go to Asia->> MARUTI–>> immobilizer->> India–>> New BCM (smart key)

Xtool A80 Pro Program Suzuki Maruti 1 Xtool A80 Pro Program Suzuki Maruti 2 Xtool A80 Pro Program Suzuki Maruti 3

There are four functions are supported as below:

  • Read Pin code
  • Program key
  • Program BCM
  • Program ECM

Xtool A80 Pro Program Suzuki Maruti 4

Step 1: Read Pin code

Select “Read Pin code”-> “Old”

Read PIN code successfully and use your smart phone to take a picture so that you can use it easily in the next step

Xtool A80 Pro Program Suzuki Maruti 5

 

Step 2: Program key

Select “Program key”

“All key will to be re- program?”

-Click “OK”

Xtool A80 Pro Program Suzuki Maruti 6

Turn on the ignition switch and turn on the hazard warning light if the smart key is lost

Xtool A80 Pro Program Suzuki Maruti 7

Manually input the 8- digit PIN code read out in step 1

Xtool A80 Pro Program Suzuki Maruti 8

Hold the new key where the logo on the remote facing and touching the start/ stop button with the key

Xtool A80 Pro Program Suzuki Maruti 9 Xtool A80 Pro Program Suzuki Maruti 10

The new key is programmed successfully.

Xtool A80 Pro Program Suzuki Maruti 11

 

Step 3: Test the new key programmed

Use the new key to start the car and test the remote.

Xtool A80 Pro Program Suzuki Maruti 12

 

Done!

 

Available link to get XTOOL A80 Pro (Same as The H6 Pro) diagnostic tool:

https://www.xtool.co.uk/wholesale/xtool-a80-pro-full-system-with-ecu-coding.html