XTOOL X100 PAD3 is able to do the key program for Mercedes-Benz, Look here:
Part 1: XTOOL X100 PAD3 Mercedes-Benz Key Programming Car List
Car maker | Model | Year/Chassis | Function |
BENZ | A Series | 2005-2013 | 1.Read EIS Info
2.Read/Write IR Key lnfo 3.Generate Key File |
BENZ | B Series | 2005-2013 | 1.Read EIS Info 2.Read/Write IR Key lnfo
3.Generate Key File |
BENZ | C/CLK Series | 2006-2013 | 1.Read EIS Info
2.Read/Write IR Key lnfo 3.Generate Key File |
BENZ | CLA Series | 2013-2016 | 1.Read EIS Info
2.Read/Write IR Key lnfo 3.Generate Key File |
BENZ | CL Series | 2006-2013 | 1.Read EIS Info 2.Read/Write lR Key lnfo 3.Generate Key File |
BENZ | CLS Series | 2006-2013 | 1.Read EIS Info
2.Read/Write IR Key lnfo 3.Generate Key File |
BENZ | E Series | 2005-2015 | 1.Read EIS Info
2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation(With Programmed Key) |
BENZ | G Series | -2015 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation (With Programmed Key) |
BENZ | GL/GLS Series | 2006-2013 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation (With Programmed Key) |
BENZ | GLC/GLK Series | 2008-2014 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation(With Programmed Key) |
BENZ | M/ML Series | 2006-2013 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation(With Programmed Key) |
BENZ | R Series | 2006-2016 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation(With Programmed Key) |
BENZ | S Series | 2006-2012 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation(With Programmed Key) |
BENZ | SLK/SLC Series | 2006-2016 | 1.Read EIS Info 2.Read/Write IR Key Info 3.Generate Key File 4.Password Calculation(With Programmed Key |
BENZ | ML Series | 163 Chassis | 1.Remote matching |
BENZ | C/CLK Series | 204 Chassis | 1.Luggage lid operation |
BENZ | E Series | 212,213 Chassis 1 | 1.Luggage lid operation |
BENZ | GLE Series | 166 Chassis | 1.Luggage lid operation |
BENZ | S Series | 221 Chassis | 1.Luggage lid operation |
Part 2: How to add Mercedes-Benz Infrared Key by X100 PAD3?
Tools need:
XTOOL KC501 Key & Chip Key Programmer
One original car key+ one blank key
Mode: Via OBD
Main operation guide:
Step 1: Read EIS info
Step 2: Get password from the programmed car key
Step 3: Generate the key file
Step 1: Read EIS info
Connect X100 Pad3 tablet with WiFi firstly
Enter main menu, select [Immobilization] -> [BENZ]-> Agree with the disclaimer-> select [Infrared key system] -> [Add Key]
Read the on-screen instruction of [Add key]
Make sure the network connection is ok and press “Ok” to continue
Then operate as below:
-Connect KC501 to XTOOL X100 Elite
-Insert the original car key into the EIS
-Wait for 5 seconds, and then remove the original car key from the EIS
Click on “OK” on the screen
Select the communication method with EIS, and press “OK” to continue
Select [Read via OBD] -> [Automatic Identify]
Read out the EIS info and press “Next”
Step 2: Get password from the programmed car key
Follow the prompt to insert the same original car key into the lock
Wait for 5 seconds, and then remove the original car key from the lock
Press “OK” to continue
Follow the steps below to operate:
The original car key has passed the verification, and the original car key data will be collected soon. Note that after the data collection is completed, the original car key needs to be inserted into the lock and wait for 30 seconds, and then the car can be started normally after inserting and removing the key several times.
Insert the same original car key into the infrared key jack of KC501
Press “OK” on the screen to collect data…
Wait for about 5-15 minutes until the collection data is successful.
Insert the programmed key into EIS (without turning on the ignition switch)
Wait for 30 seconds, put it out and reinsert it
The programmed key may need to be plugged and unplugged many times to start the car normally.
Press “OK” to obtain the password and press “OK”
Step 3: Generate the key file
Choose one key location to be generated (select any one unused key)
Press “OK”
Insert a new key into KC501 infrared key slot, and press “OK”
Key file has been written into the new key and press “OK”
Finally, test the programmed key and original key to check if both of them can start normally and the remote is ok.