XTOOL A80 H6 Hyundai Tucson 2019 Smart Key Programming via OBD

Have one car Hyundai Tucson 2019, hook XTOOL A80 H6 up to it for key programming via OBD. It’s done successfully in the main 2 steps.

Check the whole process carefully.

Step 1: Get security/authorization code

Make sure the connection between A80 H6 tablet and the vehicle via OBD is proper

Enter “Diagnosis” function

Agree with the disclaimer

Select “Immobilization”-> “Hyundai”-> “Security/Authorization code”-> “47 Authorization Code  (smart card)”

Turn the ignition switch off

When the security/authorization code is got successfully, go to next step.

Step 2: Program immobilizer/remote

Tap “Program immobilizer/remote”-> “Select from vehicle”-> “General”-> “TUCSON  (TL)”-> “2015-2020”-> “Smart key system”-> “Program smart keys”

Turn off the ignition switch

Input security code has got in step 1 manually

Put smart key vertically close to the start button and press the start button

Smart key programming is successful, then program next key by the same steps

After the key programming process is done, exit the system and checks the smart key programmed or not

BTW, attach the XTOOL A80 H6 car list for Hyundai (General) IMMO programming.

Note:

Here just share all car models supported in Security/ Authorization code and some car models cover the year 2019, 2020 in Immobiliser/Remote system.

For the complete car list, please visit http://www.xtooltech.com/FUNC_DOC/PS_IKHYUNDAI_V27_35_EN.PDF

https://www.xtool.co.uk