XTOOL X100 PAD2 (Pro) Program 2013 Dodge Grand Caravan Key Fob

Used XTOOL X100 PAD2 to program new key on a 2013 Dodge Grand Caravan, it worked fine! Only need 2 mins!

Main steps:

Step 1: Read security code

Step 2: Program new key

The procedure:

Connect X100 PAD2 to the vehicle via main cable

Go to immobilization-> CHRYSLER

Agree with the disclaimer

Select Immobiliser/Fobik (WCM)-> Auto

Turn off the ignition switch and then turn on

It’s type 4.

Then go to read security code and then program new key.

Step 1: Read security code

Select “Read security code”

When the security code is read out successfully, keep it in mind, because the code for each car model is different.

Step 2: Program new key

Select “Program new key”

Then switch ignition off, insert the new key and switch ignition on

Input the security code just read out in step 1

The new key is programmed successfully.

Finally, check if the new key can work or not.

OK, it starts the car normally.

All right! That’s the whole process that I use x100 pad2 to program new key to my 2013 Dodge Grand Caravan. It works like a charm!

The key also can be done by XTOOL X100 PAD2 Pro. Because they support the same function, and the main difference is X100 Pad2 Pro adds VW 4^th and 5^th IMMO than X100 pad2 key programmer.

Have fun!

www.xtool.co.uk