Here, xtool.co.uk runs through the process of programming a 2014 Ford EcoSport, where the customer required a spare key. The process was carried out in the following stages using the XTOOL X100 PAD3 (X100 PAD Elite), which allows for programming without any dismantling of the vehicle.
Vehicle – 2014 Ford EcoSport
Situation – Customer required a spare remote key for the vehicle. The key prepared cannot start the car normally.
Equipment needed and why – XTool X100 Elite was used, because the car model is supported by this Xtool key programmer
The operation guide:
Step 1: Connect X100 PAD3 key programmer to the vehicle via the main cable directly
Step 2: Select “Immobilization”-> “Brazil Ford”
There are 5 options can be selected:
- Pincode calculate
- China Ford
- USA Ford
- AUS Ford
- Brazil Ford
Here select “Brazil Ford”-> “Immobiliser”
These car models are supported:
-Courter, Ecosport, Edge, Escort, Explorer, Fiesta, Focus, Fusion, F-250, F-350, KA, Mondeo
Select Ecosport-> 2013-2014
There are three functions can be performed as below:
- Add a key
- Erase keys
- Read number of keys
Step 3: Read number of keys
- Click “Read number of keys” to check the current key numbers
Step 4: Add a key
- Select “Add a key”
- Insert a new key and turn ignition on
Step 5: Wait a moment till the key programming is successful
Awesome! Xtool X100 Pad3 perfectly add new key to Ford EcoSport 2014!
Device used:
XTOOL X100 PAD3 (X100 PAD Elite) Tablet Key Programmer + KC100 Full System OBD2 Diagnostic Tool:
https://www.xtool.co.uk/wholesale/xtool-x100-pad3-tablet-key-programmer-with-kc100.html
